MS-1-5k S Type Load Cell Alloy Steel 5000 LB NTEP. 5000 lb S-Type Alloy Steel NTEP load cell with,20' Cable and certificate. 5000 LB S-TYPE LOAD CELL FOR HANGING CRANE SCALE. Safe Overload: 120%FS. Zero Balance: ±1.00%FS. China S Type Stainless Steel Load Cell (MS-1), Find details about China Load Cells, Sensor from S Type Stainless Steel Load Cell (MS-1) - Aerospace South-Ocean(Zhejiang) Science and Technology Co., Ltd.
- Load Cell Sensor
- Ntep Ms-1 Load Cell User Manual Instructions
- Crane Load Cells
- Ntep Ms-1 Load Cell User Manual Download
- -
1
SECTION 1 INTRODUCTIONS
1.1 Introduction
The indicator provides an accurate, fast and versatile series of general purpose weighing
indicator with counting, check-weighing, animal weighing functions and preset tare.
1.2 Specification
Housing
plastic housing
Power supply
Load Cell Sensor
110V 50/60Hz
built-in rechargeable battery. 6V4AH.
Display
6 digits 1
’LED.
Max input
15mV
ADC
Σ-Δ
External Resolution
1/30000
Interface
Ntep Ms-1 Load Cell User Manual Instructions
RS-232 Output
Stabilisation time
1 second typical
Operating temperature
0°C - 50°C / 32°F - 104°F
Load cell drive voltage
5V/ Max 150mA
Other function
Real-time clock and units conversion
Load cells
Up to eight 350 ohms cells
1.3 Installation
The weighing indicator should be sited in a location accuracy would not be degraded.
Avoid extremes of temperature.
Avoid unstable power sources. Do not use near large users of electricity such as welding
equipment or large motors.
Verify the voltage showing on the label matches the voltage in your area.
connection of loadcell:
Plastic housing connect to Din9
Pin6 +E
Pin1 -E
Crane Load Cells
Pin9 +S
Pin8 -S
Pin5 shield
connection of RS232
Plastic housing connect to Din9 Pin 2 TXD Pin3 RXD Pin5 GND
SECTION 2 KEY DESCRIPTIONS
SOFT POWER ON/OFF Key